Forum

Anything else..

And The TamTech???

Page:
1
2
3
4
5

TOPIC:

And The TamTech??? 10 years 2 months ago #39778

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	All spares are welcome rcmodelstory.over-blog.com/
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39811

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	Advices please. My tampacks are surely out. But I found 4 lipos 1S bought for orlandoo. Can I use them for my tamtechs? The CPR will accept the lipos???? Thanks for advices. rcmodelstory.over-blog.com/
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39812

waterbok Offline Get Rough! Posts: 3498 Likes received: 1171	Should work, but a little low on mAh
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39813

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	Thanks and with 2 That should be ok rcmodelstory.over-blog.com/
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39814

waterbok Offline Get Rough! Posts: 3498 Likes received: 1171	if you put them parallel otherwise you get a very fast (glowing) tamtech
	Please Log in to join the conversation. Last edit: by waterbok.

And The TamTech??? 10 years 2 months ago #39815

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	EUHHHHH!!!! I don't want to smoke my CPR.... Only have a smooth run with the 961. Avoiding my doggy teeth too..... rcmodelstory.over-blog.com/
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39816

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	The transmitter is good. I found a pair of crystals, The tampak is fully charged. MY CPR UNIT SMOKED!!!!! It still work but it smokes and smelts the burned components DAMNED!!!! rcmodelstory.over-blog.com/
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39831

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	I think that I need a CPR unit. Somebody could make me a picture of the inside of the tamtech CPR please? I think that an error had been made in a modification. rcmodelstory.over-blog.com/
	Please Log in to join the conversation.

And The TamTech??? 10 years 2 months ago #39896

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	I found the problem with my CPR. I need 4 transistors npn 1804. I find them nowhere. RS, Darnell, and Conrad haven't. And they are too expensive on eBay. If somebody know where I could buy them for a good price... rcmodelstory.over-blog.com/
	Please Log in to join the conversation. Last edit: by stingray-63.

And The TamTech??? 10 years 2 months ago #40020

stingray-63 Topic Author Offline Moderator Posts: 15391 Likes received: 6174	After 2h of servo adaptaton, the 961 is working. And the tampak still works too rcmodelstory.over-blog.com/ The following user(s) Liked this: larbut
	Please Log in to join the conversation.

Page:
1
2
3
4
5

Moderators: caprinut, stingray-63, AndyAus

Forum

Anything else..

And The TamTech???

Time to create page: 0.663 seconds

Powered by Kunena Forum