TOPIC:

Part labellling in the Manuals 10 years 8 months ago #37022

Kishore Offline No Guts No Glory! Posts: 9 Likes received: 0	I am very new to rc hobby and Tamiya, bare with my noob question. what are numbers (1~7 ; 8~10.... )in the attached screenshot(boxed in red) of a tamiya manual(56323) specify? The same format is observed in all the manuals, what is the significance of it ? I am very new to this so please explain this even if it's an obvious thing.thank you Attachments:
	Please Log in to join the conversation. Last edit: by Kishore.

Part labellling in the Manuals 10 years 8 months ago #37023

larbut
Offline
Owner
Posts: 4126
Likes received: 1498

Hi Kishore, and welcome to TamiyaBase!

Those "dots" with numbers in represent the steps in the manual where the pars should be used.
This is for modern Tamiya Manuals, where you get the parts collected in bags relevant to the steps in the manual.
For example: For building steps 1 to 7, you will need the hardware in the bag labelled "A"

In older Tamiya manuals the hardware bags contained similar items (i.e all screws in one bag) and you had to seach through all bags to find the correct hardware. (which was part of the fun for my parts :-)

)

Signature now gets correct formatting if you edit it in your Profile. Use normal BBcode if you want.
www.tamiyabase.com was formatted automatically.

The following user(s) Liked this: Kishore

Please Log in to join the conversation.

Last edit: by larbut.