TOPIC:

today my wheels came as did my new alloy arms by gpm they are a tight fit seeing as made for the drift chassis and the bottom arms are fitted different than on the tt01 type ebut i had a m chassis conversion kit i never used and it had the inserts i needed but had to file the down so could get the gearbox back together was worth it though tightens steering and suspension up a lot plus fitted new shocks tried it and was awesome ...although did kill my mod motor thats why the "silver can " is in there









sorry for pic quality no flash on my phone

Hey... the details I wanted to see.
Good stuff.

and your welcome the only problem i have with this conversion (3racing) is the allen headed screws that fasten into the alloy gearbox covers don't like to come out ...i have a trick find a drill bit that almost fits in the allen bit and drill the badword out or even easier don't put the alloy covers on

Allen heads are vulnerable in my experience. Murdered quite a few titanium ones.

this pretty bland box arrived today


took 2 hours to do the soldering due to being at work and how cold it was


but its in and its FAST


inixracing 5.5t motor 120a esc, 2200mah turnigy lipo 2s 35/70c, 24t pinion and 58t spur, had to remove diffs and put them in to the other side that i had them

just to let everyone know who's thinking of going brushless i bought an inixracing combo 5.5t motor and 120amp esc for