TOPIC:

A while since I've done anything vintage related...

Today Flo's old Boomerang got new shoes mounted.


And I removed the old tires from the old wheels.
When tires is hard as a rock, I'v found it easiest to just remove one side knob and cut right across with a side cutter to both ends.
This took me 2 minutes tops!




Wheels is now soaking in a bath off grafitti remover gel.

And lately I struck a deal on Tamiya semi parts and Axial SCX10 x2 + spare parts.

The orginal SCX10 which must be 10+ years needed a lot of work before I could take the first test drive..
SCX10 Honcho was this called and was sold under AX90022 part number as RTR.

I did as follows:
# Replaced all bearings in front axle and diff bearings in transmission.
# Moved steering servo from axle to chassis.
# Changed from Y link up front to 4 link then to 3 link with Panhard.
# At same time changing front and rear links from plastic to metal
# Made steering links and Panhard rod.
# 3d printed plates for the rocksliders so I could move battery and esc there to lover COG.
# 3d printed dual servo for steering servo and receiver box.
# Metal C-hubs and high steering knuckles.
# Front light wires broken so had to solder them and swap from light unit to receiver power as front output was dead.
# Swapped out faulty servo and esc.
# Changed from 27t motor to 55t.
# General cleaning.

Nice work Richard.

Thats a beauty Richard, nice work.

 

F1 chassis cleaning today.
I know I should probably already own one, but I’m thinking about buying and ultrasonic tank to help with the cleaning process.
Tomorrow I need to dig out the rest of the parts to make a complete chassis or as near as I can.

Al wrote:

. . .
I know I should probably already own one, but I’m thinking about buying and ultrasonic tank to help with the cleaning process.
. . .

Yes, you need one!

It's a dream for me to. My mother one is too old ( from 60's or 70's)  and dosn't work as it should. I know that I could replace the patches but don't know how to do.

By far the coolest hop up for any Tamiya I have ever had! Such a refined spaceframe design from [url=https://www.facebook.com/groups/545699062284837/user/100064137337471/?__cft__[0]www.facebook.co...imaforever[/url] and complimented with the redesigned Hotshot 2 rear tower by [url=https://www.facebook.com/groups/545699062284837/user/100069144821692/?__cft__[0]www.facebook.co...tcustomsRC

 

  [/url]

"AndyAus post=78046 userid=3322
By far the coolest hop up for any Tamiya I have ever had! Such a refined spaceframe design from [url=https://www.facebook.com/groups/545699062284837/user/100064137337471/?__cft__[0]www.facebook.co...imaforever[/url] and complimented with the redesigned Hotshot 2 rear tower by [url=https://www.facebook.com/groups/545699062284837/user/100069144821692/?__cft__[0]www.facebook.co...tcustomsRC

 

  "[/url]
Ryo's work is fantastic

I almost finished my 2CV Rally Body.

Making this body is so much fun, isn't it?