TOPIC:

Don`t know if this is the best place for this subject, so Lars move where you see it fit if needed 

This combo is hard to find:
1.9" size
Disc type (concave)
Bearing fitment
White

So far my only options are:
Tamiya Bear Hawk front wheels.
JConcepts 1.9 Mono Block for Classic RC10
Vintage Kyosho Ultima (dish with holes at outher end)
Custom Works 6252 (2.0x1.0 so should fit normal touring tire)

But is there others out there??

1.9 touring with hex fitment is plentyful to say the least. But don`t want hex fitment as they never really work with the bearing hex conversions.
2.0, 2.1 (2.15) and 2.2 with hex is also common, like Thundershot, Manta Ray, Bigwig to name a few.
JC Racing also makes 2.2 in retro design for modern 2.2 tires.

But again, 1.9, disc, bearing fitment, white is a rare combo.
BTW: This is for my Zakspeed Capri Hornet Speedrun project.
1.9 touring is the biggest I can fit up front without raising the body, which I don`t want due risk of lift off at 100+ kph.

I could have gone for 1.55 (M chassis) if there is such thing as 1.55 disc, but m chassis use hex fitment on all wheels.

Another option is 1.7, but never seen disc wheel in that size. And the HPI Cup Racer (MX60) tires is not belted wich can rip the tire apart at high speed.


So any ideas is welcome as I plan on doing a V2 next summer with a new speed record 
This year problems was rear tires got unglued which made the foam to come out which wrecked the wheels as they became untrue after that and tires ripped and wheel edge damaged.
Fron problems, wheel bearings going bad on the bearing hex conversion causing untrue wheel combo, tires came unglued from the Hornet wheel, after gluing they became untrue, then they became unglued.
I now have some C chassis wheels that is designed to take m chassis tire. But it has spoke design and I don`t they will run true at speed.

HI

I design in CAD and 3d Print wheels for RC Cars. If you would like to I would happily look at designing the exact wheels you want.

I do not charge for the design, just the final product.
The final product will be listed on ebay so you have some buyer protection.

If you search ebay for this as an example

"1/10 Scale RC Porsche Fuchs Wheels printed using hi quality resin"