Keyword
Forum
General
Introduce yourself here!
Back into RC

TOPIC:

Back into RC 9 years 7 months ago #42984

And does the gas works in place of the steering servo?
Look the state of the receiver pins. Maybe a bad contact????

Please Log in to join the conversation.

Back into RC 9 years 7 months ago #42985

No, if I put the throttle servo in channel 1 it does not work

Please Log in to join the conversation.

Back into RC 9 years 7 months ago #42986

:angry: try the transmitter near a radio speaker with the radio trimmed in AM. If you have a sound perturbation with the channel 1, the problem comes from the receiver.

Please Log in to join the conversation.

Back into RC 9 years 7 months ago #42987

How would I know if the sound is coming from channel 1?
Never mind, I just figured that out ...... turn the throttle right?

Please Log in to join the conversation.

Last edit: by cumminsdoc.

Back into RC 9 years 7 months ago #42988

:) yes the perturbation should be eared when you move the stick. Trimm the radio in low frequencies.

Please Log in to join the conversation.

Back into RC 9 years 7 months ago #43000

Ok, now if I need to buy a new radio transmitter & receiver, any recommendations without breaking the bank?

Please Log in to join the conversation.

Back into RC 9 years 7 months ago #43001

A standard 2,4ghz set is largely enough

Please Log in to join the conversation.
Moderators: caprinut, stingray-63, AndyAus
Forum
General
Introduce yourself here!
Back into RC
Time to create page: 0.111 seconds