Keyword
  • Page:
  • 1

TOPIC:

Blazing Blazer NEW project. 1 year 1 month ago #81122

Recently got this Blazer. 

Listed on eBay at £1400. No one was interested so i messaged the guy and asked if he would take £1K. 

Answer was NO.!

A week later he got back to me and we settled on £1100.

I had to got and fetch it. 100 mile round trip.

Worth it though. I think.

Listed as 'NEW'. It's not new. !  It's very good though.

It was complete apart from a few screws for the front steering linkages which i had in my spares tin...Luckily.!

Jezus the GOLD body is giving me nightmares.!

Came with a very nice boxed Acoms AP427 Radio and a spare Bruiser gearbox and motor.

Rear lights are Repro and need work to make right.

Will make a nice one when i have done with it.

Another load of paint to remove and i haven't even finished the Bruiser yet..!



 
The following user(s) Liked this: stingray-63, 1972 LeMansGT Jim

Please Log in to join the conversation.

Last edit: by Ranger1.

Blazing Blazer NEW project. 1 year 1 month ago #81123

The gearbox needs work. It's not as smooth as it should be.

Everything on the chassis and other stuff is all ok.

I can't do that work just yet.

I have done the wheels and tyres which is an easier job. For now.!

 
Attachments:

Please Log in to join the conversation.

Last edit: by Ranger1.

Blazing Blazer NEW project. 1 year 1 month ago #81124

Rear lights..
 
Attachments:

Please Log in to join the conversation.

Blazing Blazer NEW project. 1 year 1 month ago #81125

About the Gearbox. It came like this..1st picture.

Shouldn't this gearbox have a nut and a washer on the threaded rod coming out?

My best guess is this should be there (Taken from my spares tin.)..2nd pic.

Just my own take on it..!
Attachments:
The following user(s) Liked this: Al

Please Log in to join the conversation.

Last edit: by Ranger1.

Blazing Blazer NEW project. 1 year 1 month ago #81126

I have 3d printed rear lights on mine because it missed one. 
The following user(s) Liked this: Ranger1

Please Log in to join the conversation.

  • Page:
  • 1
Moderators: caprinut, stingray-63, AndyAus
Time to create page: 0.247 seconds