TOPIC:

Purple_rob wrote:

I know what you you mean about mixing house work with hobby, got mess all over my bench at the moment. It's mainly going through my house tools saying where the "f" did I put that while turfing everything on my work bench

I def agree with you !

Well with a few Immanent arrivals I felt the need to sort out my shelving Not happy at all with my temporary solution I started by cutting some threaded rod, Some 130x80x25 steel U channel and bolting some 30x30 angle alloy to 2 pieces of the U channel ( 1 at each end ) I hung the threaded rod from the existing shelving brackets and BAM new display

Every self respecting DIY guy needs an all terrain concrete mixer eh New to me monster wheels and bearing's

it will be a rc?

stingray-63 wrote:

it will be a rc?

No, But maybe the tow tractor

That time you cut your boat trailer in 3

OK,
My guess is the trailer needs to grow a bit to accommodate the boat outside the door

And????

oldwilly wrote:

OK,
My guess is the trailer needs to grow a bit to accommodate the boat outside the door

And????

Well spotted, Yes it is for the boat outside the door Bu the trailer needs to shrink a bit for a better fit ( 300mm all round ) The Original trailer was a bit stuffed to I picked this on e up reasonably cheap, Of course I need to fit the Boat to the trailer and being a CAT makes it even more fun

All final welding on the main chassis completed and the first part of the axle Plenty to do before the boat can slide back on