Keyword
  • Page:
  • 1

TOPIC:

Richard`s speedrun Hornet new PB @ 54.6mph (87.9kph) 1 year 3 months ago #80675

  • caprinut
  • caprinut's Avatar Topic Author
  • Away
  • Moderator
  • Moderator
  • Posts: 2802
  • Likes received: 4693
Getting there!
As soon as I let of the throttle it became airborne and ripped off all 4 bodypost from the chassis and damaged the wing.
I clearly need to put on the added ductail wing again to keep downforce.
Also need to turn off dragbrake completly as 10% dragbrake clearly not work.
Next time no drag brake and all abs, might turn brakes down to 30%

But 54.6mph / 87.9kph is good on 2s.
I have one step left on the timing before I need to move on to 3s.

The following user(s) Liked this: stingray-63

Please Log in to join the conversation.

Last edit: by caprinut.

Richard`s speedrun Hornet new PB @ 54.6mph (87.9kph) 1 year 3 months ago #80676

Poor capri. Snif. But the hornet/grasshopper  chassis is a heavy chassis in fact....😂👏👏👏👏up to 80 kmh respect
The following user(s) Liked this: caprinut

Please Log in to join the conversation.

Richard`s speedrun Hornet new PB @ 54.6mph (87.9kph) 1 year 3 months ago #80677

  • caprinut
  • caprinut's Avatar Topic Author
  • Away
  • Moderator
  • Moderator
  • Posts: 2802
  • Likes received: 4693
Thanks Flo!

I`ve not checked it yet, but I hope everything is ok.
Amazed how much the Hornet chassis can take in terms of beating.
And this is a vintage chassis.
The following user(s) Liked this: stingray-63

Please Log in to join the conversation.

Richard`s speedrun Hornet new PB @ 54.6mph (87.9kph) 1 year 3 months ago #80689

87,9 km/h is impressive with a Hornet chassis!
I'm looking forward to the development to see how far you can push it.
-Lars
Signature now gets correct formatting if you edit it in your Profile. Use normal BBcode if you want.
www.tamiyabase.com was formatted automatically.
The following user(s) Liked this: caprinut, stingray-63

Please Log in to join the conversation.

  • Page:
  • 1
Moderators: caprinut, stingray-63, AndyAus
Time to create page: 0.363 seconds