Attachments:
The following user(s) Liked this: stingray-63
|
|
|
Please Log in to join the conversation. |
|
Small info for the ff01. It has an adjustable wheelebase. Standard for all the bodies primera mondeo civic volvo etc.... but was in small wheelebase by reversing the rear shocks mount and upper arms to fit the clio williams body.
And has been released in a special edition with the calsonic primera body equipped with some hopups. Motor radiator, fluo springs, lightweight king pins aloy blue and red wheeles nuts... and a sport tuned. |
|
Please Log in to join the conversation.
Last edit: by stingray-63.
|
Ah yes, I can see the difference in the manual. Since the FF-01 was never released as just a chassis, there is no single manual that shows multiple wheelbase options. You have to compare the manuals for models with different bodies to see it. Flipping the upper arms doesn't do much, so the difference in wheelbase must be pretty small. Do you have any idea what it is? Looks like Tamiyabase lists the Clio model as 248mm, so that would be a 13mm difference. Didn't realize this "upgrade edition" existed. Looks like a pretty small list of upgrades, but still an improvement. It also has adjustable upper arms (threaded rods) and tire foams. Thanks for the extra information!
The following user(s) Liked this: stingray-63
|
|
|
Please Log in to join the conversation. |
|
I haven't these chassis at my home(in my dad's home) but yes the clio is really shorter. And for the primera mine has been upgraded with gpm parts. I will find some picts in my picts bank.
|
|
Please Log in to join the conversation.
Last edit: by stingray-63.
|
|
Attachments:
The following user(s) Liked this: Al
|
|
Please Log in to join the conversation. |
|
The clio is one of my favourite rc. Easy to run and funny. Same with a trinity 13x3 motor. I killed a lot of tires and rims. So my shop adviced me rallye blocks tires. Always fun with this car. Far to be a compétition châssis but always ready to have fun.
The following user(s) Liked this: Al
|
|
Please Log in to join the conversation. |